Wartsila | Bearing Rebabbitting | Repair | White metal

i) The bearing was thoroughly cleaned, the white metal was broken and chipped off from the bearing inner diameter.

ii) Bearing was subject to a shot blasting process for cleaning.

iii) Hardness and MPI for crack detection was done and were observed within limits.

iv) Rebabbitting of the generator bearing was undertaken in our plant having the latest breed of centrifugal equipment and machines. The bearing ID was maintained as per the drawing received from the client.

Wartsila Generator Bearing Inspection under Process	Wartsila Generator Bearing After Rebabbitting

RA Power solutions having 44 Years of experience undertakes rebabbitting of large bearings up to 1500 MM diameter, New bearings are also manufactured, as per the drawing or a sample. For more information regarding repair of Generator Bearing of Wartsila, please contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131 or +91 9810012383.

 

Wartsila Generator Bearing After Repair	Wartsila Generator Bearing Ready for Dispatch